Window Well Installation
Toronto

Ontario Building Code requires egress window wells to have a minimum clear width of 760mm (30 inches) and extend at least 200mm deeper than the window sill. BaseWorks recommends a minimum 900mm clear width to provide comfortable emergency egress and easier maintenance access. The well depth is determined by the window sill height below grade.

Yes. Every window well installation Toronto requires proper drainage at the base to prevent water pooling. A minimum 300mm layer of clear crushed stone at the well base is required. For deep wells or high groundwater conditions, BaseWorks connects a perforated drain pipe from the well base to the weeping tile system or a sump pit.

Window well covers reduce water and debris accumulation significantly. Polycarbonate bubble covers are the most popular - they allow light transmission while shedding rain. They must be removable from the inside without tools to maintain egress compliance. BaseWorks installs covers and verifies egress operability after cover installation.

Window well installation Toronto typically costs $800 to $2,500 per well, depending on well type, depth, drainage system required, and whether a cover is included. When paired with egress window installation as part of one project, window well cost is included in the egress window quote.

Proper installation with adequate drainage gravel, a perforated drain pipe at the base connected to weeping tile or a sump, positive grade away from the well, and a polycarbonate cover all prevent water pooling. BaseWorks designs each window well installation Toronto with drainage appropriate for the site conditions and the depth of the well.

Window wells come in three main materials: galvanized corrugated steel (most common, affordable, durable), polyethylene plastic (lightweight, corrosion-proof, easy to handle), and poured or precast concrete (permanent, load-bearing, custom sizing). BaseWorks installs all three types depending on project requirements, well depth, and budget.